Showing posts with label Legendary Pokemon. Show all posts
Showing posts with label Legendary Pokemon. Show all posts

Wednesday, April 16, 2014

REGICE - Pokémon Papercraft



REGICE - Pokémon Papercraft
Name: Regice
Type: Ice
Species: Iceberg Pokémon
Height: 1.8 m (5′11″)
Weight: 175.0 kg (385.8 lbs.)
Interesting Facts: Regice cloaks itself in air that is -328 degrees Fahrenheit. It can survive if submerged in molten lava. Due to its extremely frigid body, anyone who approaches it can freeze. It is capable of surviving even extremely hot temperatures. Regice has the unexplainable ability to wield electrical attacks like Zap Cannon.

THE PAPER MODEL
Height: 18.3 cm/ 7.2 in
Width: 26.8 cm/ 10.6 in
Depth: 12.7 cm/ 5.0 in
Pages: 6
Pieces: 32
Level: Easy
Designer: Brandon
Photo: Skeleman
NOTES: Regice is the easiest of the Regis but the difficulty of it goes up more than most models with a lineless version. This is because unlike a lot of models it has to be scored and folded or it will not look right. But with a lineless version is becomes hard to know where the score and fold is supposed to be in some places.

Tuesday, April 8, 2014

Pokemon GIRATINA Paper Model



GIRATINA - Pokémon Papercraft
Name: Giratina
Type: Ghost/Dragon
Species: Renegade Pokémon
Height: 4.5 m (14′09″)
Weight: 750.0 kg (1653.5 lbs.)
Interesting Facts: Giratina is able to travel through and control dimensions besides those of time and space. When in its Origin Forme, it is able to pass through dimensions at will, however, it will turn back to its Altered Forme due to the gravity change from the Reverse World. It does so by emitting a whirlwind from its mouth which creates a portal.

THE PAPER MODEL
Height: 21.0 cm/ 8.3 in
Width: 31.0 cm/ 12.2 in
Depth: 23.5 cm/9.3 in
Pages: 9
Pieces: 84
Level: Medium/Hard
Designer: Brandon
Photo: LuIS
NOTES: Build from the tail on. Following the numbers here is really important. Build the legs and before attaching them to the body, glue all of the nails and yellow parts to them. On the middle yellow neck part build pieces 58 and 65, glue the wings to them and only after that glue pieces 59 and 66, after that is done, glue to the body. The head is easy just be careful to follow the numbers.

After quite some time, the wings may start to sag and need to be reinforced with wire or scrap to keep them up.




Pokemon PALKIA Paper Model



Palkia - Pokémon Papercraft
Name: Palkia
Type: Water/Dragon
Species: Spatial Pokémon
Height: 4.2 m (13'09")
Weight: 336.0 kg (740.8 lbs)
Interesting Facts: Palkia appeared in the first three Diamond & Pearl series Pokémon movies. It was first shown in The Rise of Darkrai, where it fought with Dialga and Darkrai in a battle that nearly destroyed Alamos Town. It was shown in a flashback in Giratina and the Sky Warrior. Palkia's final movie appearance was in Arceus and the Jewel of Life. It was shown for the first time with both the other members of its trio, and started a battle with them which awoke Arceus.

THE PAPER MODEL
Height: 22.7 cm/ 8.9 in
Width: 24.0 cm/ 9.4 in
Depth: 27.3 cm/ 10.7 in
No. of Pages: 12
Level: Hard
Designer: PODragon
Photo: LuIS
NOTES:  Start the model at the head. The fold lines for this part are indicated in blue lines, it's necessary to fold them in order to give the head and neck a proper shape. You can either glue the wings when indicated by numbers or after the arms are glued, use a drop of glue on the side they meet the body. The arms are built from the hands up, you must glue the arm plates before going any further, they need pressure from the inside. The shoulders are simple and there are references on where to glue the shoulder plates. Join the arm and the shoulder BEFORE closing the arm. The arm can be rotated and glued on another position besides the one on the picture. The legs are built from the feet up. I recommend reinforcing them from the inside, so as the middle of the body. The model is closed at the tip of the tail. The stripes must be glued BEFORE closing, while you can apply pressure from the inside, if you follow the numbers you'll be able to do so.



Pokemon DIALGA Paper Model



Dialga - Pokémon Papercraft
Name: Dialga
Type: Steel/Dragon
Species: Temporal Pokémon
Height: 5.4 m (17'09")
Weight: 683.0 kg (1505.8 lbs)
Interesting Facts: Dialga is a dark blue sauropod-like Pokémon with some gray metallic portions, such as its chestplate, which has a diamond in the center. It also has various light blue stripes. It has a fin-like structure on its back and a crest on its head, resembling a dinosaur. Dialga also has two horns on top of its head, two fang-like horns around its mouth, three spines on the back of its neck, long claws, and a short tail. The wing-like structure on its back can be used to focus the flow of time, as seen in Explorers of Time, Darkness, and Sky. Pokémon Mystery Dungeon: Explorers of Sky: Dialga appears in the main storyline, but mostly as Primal Dialga.

THE PAPER MODEL
Height: 22.3 cm/ 8.8 in
Width: 17.6 cm/ 6.9 in
Depth: 27.9 cm/ 11.0 in
No. of Pages: 9 (10th is optional 2D instead of 3D on page 1)
Level: Medium-Hard
Designer: Brandon & LuIS
Photo: LuIS
NOTES:  Start the model at the head, close at the tip of the tail. This model has a lot of details to glue on the model, like nails, eyebrows, the chest piece and the so called "fan". It's suggested to glue the details as you go, while you can still apply pressure from the inside. The eyebrows and every diamond shape piece is supposed to be built around the front and closed at the back, where there are no tabs, this is more important for the fan, since the back does not close the piece itself, but instead it's glued on the black details on the back of the fan. After these pieces are glued to the black details, glue the front part to the front of the fan. Further instructions on the template.


Monday, April 7, 2014

Pokemon LUGIA (SHADOW) Paper Model



SHADOW LUGIA|LUGIA

Shadow Lugia - Pokémon Papercraft
Name: Lugia
Type: Psychic/Flying
Species: Diving Pokémon
Height: 5.2 m (17'01")
Weight: 216.0 kg (476.2 lbs)
Interesting Facts: Lugia is the version mascot of Pokémon Silver, its remake Pokémon SoulSilver, and Pokémon XD: Gale of Darkness, appearing on the boxart of them all. In Pokémon XD, Shadow Lugia, codenamed XD001, is a main part of the storyline, and Cipher's ultimate Shadow Pokémon.

THE PAPER MODEL
Height: 21.8 cm/ 8.6 in
Width: 31.1 cm/ 12.2 in
Depth: 26.1 cm/ 10.3 in
No. of Pages: 9
Level: Hard
Designer: LuIS & Brandon
Photo: LuIS
NOTES: Instructions included. Only print the parts needed for building (Pages 2-10), excluding the last page for Shadow Lugia or Lugia, as they're used for the opposite one. Packs included for both.
Be sure to enforce the joints of the legs and wings, as they're the weaker points of the mode (and could collapse otherwise).



Pokemon ARTICUNO Paper Model



DOWNLOAD


ARTICUNO - Pokémon Papercraft
Name: Articuno
Type: Ice/Flying
Species: Freeze Pokémon
Height: 1.7 m (5′07″)
Weight: 55.4 kg (122.1 lbs.)
Interesting Facts: Articuno first appeared in the second movie. Lawrence III attempted to collect Articuno and the two other legendary birds in his scheme to capture Lugia. Also, the Frontier Brain Noland uses an Articuno against certain challengers, as seen in the episode Numero Uno Articuno and The Symbol Life, when he accepted Ash's challenge and battled against him.

THE PAPER MODEL
Height: 14.6 cm/ 5.7 in
Width: 38.3 cm/ 15.1 in (Wing span)
Depth: 34.7 cm/ 13.7 in
Pages: 4
Pieces: 47
Level: Medium
Designer: PODragon
Photo: Carnilmo
NOTES: Build from the beak back, attaching wings and feet as you go. Be careful with the wings- you'll need to reinforce them somehow- Carnilmo recommends inserting a toothpick into them after the wings are attached to the body. Feel free to experiment though, at your own risk :p Further notes included in the packs.

Pokemon ZAPDOS Paper Model



DOWNLOAD

Zapdos - Pokémon Papercraft
Name: Zapdos
Type: Electric/Flying
Species: Electric Pokémon
Height: 1.6 m (5'03")
Weight: 52.6 kg (116.0 lbs)
Interesting Facts: When Zapdos flaps its glittering wings, it releases electricity that can potentially cause thunderstorms. It causes cause massive crackling and snapping sounds when it flies; these are attributed to the lightning bolts sheds when airborne. When stricken by lightning, it gains power. Zapdos reportedly appears only during thunderstorms, and is said to live among thunderclouds. However, it is rarely seen.

THE PAPER MODEL
Height: 25.9 cm/ 10.2 in
Width: 27.8 cm/ 10.9 in
Depth: 15.4 cm/ 6.1 in
No. of Pages: 8
Level: Medium-Hard
Designer: Brandon
Photo: Skeleman
NOTES: First off- be sure to fold all the sharp folds! This includes the wings, beak, legs and 'head spikes' in particular.
Start with the halo of spikes around the face, and work inward towards the beak. Be very careful with the beak in particular, it's very small and easy to mess up. Then start to work down the back of the head, and attach the first set of Yellow Wings as soon as possible. Keep working down the body, and attach the second set of back, Black Wings once the body can support them. Same goes with the feet- be sure to attach the yellow 'leg caps' before attaching the feet+brown fur overtop of the caps. Close at the bottom with the 'skirt', being sure to attach the main yellow piece, then the inverted yellow piece to match it inside, and repeat with the black pieces.
Two different 'bolt' patterns included for the base. Feel free to mix and match textures for the base in the pdo! Stony textures also work especially well.
Edge ID files also included for reference.

Zapdos XY